-
Periodic calibration: How often do the devices need to be calibrated?
In principle, the user himself determines the calibrating in
-
Is there a possibility for a remote maintenance in the event of malfunction?
Yes. In some cases it is convenient when we can access the c
-
How can the devices be cleaned?
Depending on the type of contamination, the devices can be c
-
Troubleshooting: is there a checklist?
We have put together error patterns, possible causes and pos
-
Do I have to place a filter in the gas line to the flow meter/controller?
If you use gas from Bottle which is clean and dry, there is,
-
What device parameters can be changed on site (red-y smart series)?
The device parameters will be configured in the factory prio
-
What is the impact of the moisture of the gas?
Moist gas of up to approx. 80 % rh has only a slight impact
-
Does the installation position need to be considered?
On principle, the devices can be installed in every mounting
-
What information do we need for selecting and sizing the mass flow meters and controllers?
Always provide a description of your application, why and ho
-
Can the devices also be used in low pressure?
On principle, it is possible to utilize the devices of the r